Page 5 of 5

 

W711 8" Bench Top Bandsaw A small yet incredibly tough bandsaw with a durable precision ground cast iron tilting table including a T-slot mitre fence channel. The quick release fence locks onto both front and rear of the table to provide a straight guide for ripping whilst the sliding mitre fence is adjustable for crosscutting at any angle. The blade guard can be adjusted one handed using a dial located at the rear of the machine. A strong feature on this machine is the easy access when setting the side guides and rear thrust bearing which control the blade during the cut. A durable powder coated paint finish will keep it looking good in your workshop for many years. Supplied with rip fence, sliding crosscut mitre fence adjustable 60 degrees each way, 1/4" blade, NVR switch, 60mm diameter extraction outlet, cable and plug. The dust kit converts the outlet for use with a 100mm extractor system.   W715 10" Bench Top Bandsaw A medium sized bandsaw with a durable precision ground cast iron tilting table with a stop for returning to 90 degrees after a bevel cut and two mitre fence slots. The quick release fence locks onto both front and rear of the table to provide a rigid straight guide for ripping whilst the sliding mitre fence is adjustable for crosscutting at any angle. The new rack & pinion blade guard design can be adjusted single handed using a dial on the side of the machine and is fitted with a scale to set the cutting height. Two side guide bearings and a rear thrust bearing on the end of the guard, control the blade and keep it true. Finished off with a durable powder coated paint. Supplied with rip fence, mitre fence adjustable 60 degrees each way, 3/8" blade, NVR switch, 60mm diameter extraction outlet, cable and plug.
W711 8" Bench Top Bandsaw	W715 10" Bench Top Bandsaw
Specification   Maximum cutting depth 80mm Throat width 200mm Table size 300mm x 270mm Number of Wheels 2 Table tilt 0-45 Cutting speed 1400m/min Motor (induction) 300W Blade length 1400mm Blade widths 3mm - 10mm (1/8" - 3/8") Dimensions (WxDxH) 440mm x 400mm x 700mm Weight 25Kg Rating DIY	Specification   Maximum cutting depth 100mm Throat width 250mm Table size 340mm x 335mm Table height (on optional floorstand) 900mm Table tilt 0-45 Cutting speed 800m/min Motor (induction) 375W Blade length 1712mm Blade widths 6mm - 12mm (1/4" - 1/2") Dimensions (WxDxH) [on stand] 400mm x 520mm x 840mm [1540mm] Weight 30Kg Rating DIY

W720 12" Floorstanding Bandsaw The largest in our range of light bandsaws, again with features such as an all steel construction, a cast iron tilting table with a 90 degree return stop and powder coat paint finish all ensuring this freestanding 300mm machine is tough enough for any workshop. The pressed steel frame ensures the rigidity required for high blade tension and accurate ripping. The blade is kept true by 2 large roller guides mounted to the blade guard and two steel guide blocks mounted below the table. The rise & fall of the blade guard can be adjusted and locked in position with one hand. A simple adjustment of the drive belt lowers the blade speed for anyone wishing to cut metals, plastics and very hard woods. Supplied with steel floorstand, rip fence, a cast sliding mitre guide with fence adjustable 45 degrees each way, 1/2" width blade, NVR switch, 100mm diameter extraction outlet, cable and plug.   W750 18" Floorstanding Bandsaw A large trade rated bandsaw with all of the features usually found on an industrial machine. 18" diameter balanced wheels and a powerful 3hp motor give this saw serious cutting capacities ideal for a production workshop or ambitious woodturner. The angle of the heavy cast iron table is adjusted by a handle at the rear and the work is guided by either a quick action rip fence, with a scale in both metric and imperial, or a well made sliding mitre fence for crosscutting. Setting the blade tension correctly is made simple with the addition of a quick release lever and a tension indicator. A wheel kit, included as standard equipment, gives the user complete freedom to move the bandsaw around the workshop. Supplied with rip fence, a cast metal sliding mitre guide and fence adjustable 60 degrees each way with preset stops, 25mm blade, 2 x 100mm diameter extraction outlets, cable & plug.
W720 12" Floorstanding Bandsaw	W750 18" Floorstanding Bandsaw
Specification   Maximum cutting depth 150mm Throat depth 300mm Table size 480mm x 400mm Table height 1090mm Table tilt 0-45 Cutting speed 370 & 800m/min Motor (induction) 550w Blade length 2240mm Blade widths 6mm-15mm (1/4"-5/8") Dimension (WxDxH) 800mm x 630mm x 1720mm Weight 72Kg Rating Light Trade	Specification   Maximum cutting depth 295mm Throat depth 465mm Table size 630mm x 480mm Table height 1000mm Table tilt -10 to + 45 degrees Cutting speed 420 & 840m/min Motor (induction) 2200w Blade length 3607mm Blade widths 6-37mm (1/4" - 1.1/2") Dimensions (WxDxH) 965mm x 850mm x 1980mm Weight 162kg Rating Trade

 

Charnwood Products 1 2 3 4 5

 

Page 5 of 5